Thrust Ball Bearing

Thrust ball bearing with competitive price with lower noise and high quanlity

Thrust ball bearing Characteristics

Thrust ball bearing consist of shaft washer,house washer, steel balls and a cage, the ring matched shaft is called shaft washer, matched with housing called housing washer, if their installation surface profile of housing washer spherical, their bearing can be self aligned, which can reduce deviation of installation

These bearings mainly bear axial loads and can transfer big axial loads, it  can not bear radial loads, they can be applied to steering stystem of automobile and mainly shaft of machinery

Thrust ball bearing Types

Thrust ball bearings supplied by RICH cover 2 types

Single direction thrust ball bearing

It can be separated, one shaft washer, two housing washers,one center shaft washer, steel ball cage individually,  this bearing include 3 types

Bearing with flat housing washer

Bearing with self-aligning housing washer

Bearing with self-aligning washer and self aligning seat washer

Double direction thrust ball bearing

It can bear axial loads from double directions, and can locate the bearing from 2 direction

Thrust ball bearing Dimension range

Thrust ball bearings supplied by RICH are following

Inner diameter range:100mm-1380mm

Outer diameter range :135mm-1540mm

Tolerance

RICH standard of thrust ball bearing precision covers P0,P6,P5 and P4, confirm to the national standards

Thrust ball bearing Cage

Normallly pressed cage and solid cage are adopted for this type of bearings, other cages can be used for this type of bearing for special applications

If bearing max O.D. is 250mm, pressed steel cage adopted, cage type is not indicated of bearing specificaitons

If bearing min O.D. is 250mm, then solid brass cage adopted, and cage type is not indicated in the bearing speficaiton

Thrust Ball Bearing